Summit S4600, User Manual, Page: 10 / 16

9
USING THE HOLD FUNCTION
1. Press ON/OFF to turn on the scale.
2. Let the person onto the scale after the LCD shows “0.0” and a
stable symbol.
3. Press HOLD/BMI key to lock the weight that is given by the
device.
4. Let the person off of the scale.
5. Check the weight value has been locked.
6. Press HOLD/BMI to release the function.
7. Press ON/OFF to end the measuring procedure.
Only by pressing the HOLD button can you perform disabling and
enabling the weighing lock function.
INSTRUCTIONS FOR THE BMI FEATURE
1. Power on the device.
2. You will need to know the height of the person being weighed,
so it is best to measure the person’s height before starting the
weighing procedure.
3. Proceed to weigh as normal. After the weight is stable, press the
HOLD/BMI key for 3 seconds to enter into BMI mode.
4. The display will then change to display the height.
5. The person being measured can now get off the scale as the
scale has memorized his/her weight.
6. Then the operator starts to enter the height of the person (the
height should be measured in centimeters).
7. Press TARE to change the height of the person. Press
HOLD/BMI to move to the next digit.
8. When the correct number (in centimeters) is displayed in the
height display, press UNIT to finish setting.
9. The display will then show the B.M.I. reading.
10. Press the UNIT key again to exit the B.M.I. mode.