Summit Ice Melt Systems
PO Box 6928, Tahoe City, CA 96145
Ph: 530-583-8888 Fax: 530-583-7777
www.SummitIceMelt.com
Safety Guidelines and Document Conventions
As with any electrical equipment, the safety and reliability of any system
depends on the manner in which they are installed and maintained.
Incorrect design, handling, installation, or maintenance of any of the
system components could damage the system and may result in
inadequate performance, overheating, electric shock, or fire. To minimize
these risks and to ensure that the system performs reliably, read and
carefully follow the information, warnings, and instructions in this guide.
This symbol identifies important instructions or information.
This symbol identifies particularly important safety warnings that must be
followed.
WARNING:
To minimize the danger of fire from sustained electrical arcing
if the heating cable is damaged or improperly installed, and to comply with
the requirements of Summit Ice Melt Systems, agency certifications, and
national electrical codes, ground-fault equipment protection must be used
on each heating cable branch circuit. Arcing may not be stopped by conventional
circuit protection.
Please exercise all safety precautions necessary when using ladders,
scaffolding, tools.
Page 5 of 29
Summary of Contents for Radiant Edge HotSlot
Page 31: ...Notes ...
