manualshive.com logo in svg

Summit Radiant Edge HotSlot, Installation And Operation Manual

Share
Download
Summit Radiant Edge HotSlot Installation And Operation Manual Download Page 28

Summit Ice Melt Systems

PO Box 6928, Tahoe City, CA 96145

Ph: 530-583-8888 Fax: 530-583-7777

www.SummitIceMelt.com

S1 and S2 Self-Regulating Heating Cable Specifications

  Heating Cable Specifications

Bus Wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 AWG , Nickel Plated copper

Heating Core . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Radiation Cross-linked Polyolefin

Primary  Dielectric  Insulation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .Radiation  Cross-linked  Polyolefin

Metallic Braid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 AWG (equivalent size) tinned copper

Outer Jacket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . .Polyolefin (with UV inhibitor)

Minimum Bend Radius. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.25"

Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 or 208-277 Vac

Heating Cables Meet or Exceed the Following Tests

Abrasion Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UL 1588 (8.3); IEEE 515.1 (4.3.4)
Cold Bend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IEEE 515.1 (4.2.10)
Deformation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . .IEEE 515.1 (4.2.8)
Dielectric Withstand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . .IEEE 515.1 (4.2.1)
Resistance to Impact  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . .UL 1588 (8.2)
Resistance to Cutting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IEEE 515.1 (4.3.3)
Resistance to Crushing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UL 1588 (8.1)
Temperature  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UL 1588 (9.1-9.3)
UV and Condensation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IEEE 515.1 (4.3.2)
Vertical Flame  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .UL 1588 (8.5)

Page 27 of 29

Summary of Contents for Radiant Edge HotSlot

































Reviews:

No comments

Brands by name

Popular brands

Load more brands