5
NOTES:
The temperature setting can be adjusted from +2°C to +8°C (36°F to 46°F).
To view the “set” temperature anytime, press
or
once
. The “set” temperature will
flash in the LED display for 5 seconds.
This appliance is equipped with a Memory IC
– should there be a power interruption, the unit
will automatically recover the last setting.
When you use the appliance for the first time, or restart it after it has been shut off for a long
time, there could be a few degrees variance between the temperature you select and the one
indicated on the display. This is normal and due to the length of inactivation time. Once the
appliance has been running for a few hours, everything will be back to normal.
The temperature inside the cabinet may vary slightly depending on whether stored items are
located in the upper/middle or lower section.
You may notice condensation on the outer surface of the door. This occurs when water vapor
from the air contacts the cold surface of the door and the vapor condenses on the door, causing
a fogging effect. In extreme situations, water can even drip off the door, indicating excessive
humidity in the environment.
If the unit is unplugged or turned off, or if there has been a power failure, you must wait 3 to 5
minutes before restarting the unit. If you attempt to restart before this time delay, the appliance
will not start.
CALIFORNIA CARB/SNAP DISCLOSURE
For products manufactured after January, 1, 2019:
Retail food refrigeration equipment manufactured after January 1, 2019, designed to store and
display chilled goods for commercial sale, and that use HFC-134a/R134a refrigerant are not
for sale
in California.
*This product uses eco-friendly hydrocarbon refrigerant and fully complies with California CARB
regulations. However, we are required by California Law to provide the previous disclosure
statement in every product sold in California.
This product does
not
use any refrigerants on the “List of Prohibited Substances.”
