4
8. Install the top left hinge.
9. Install the bottom left hinge to the door. Do not over-tighten the screw.
10. Place the door back on the appliance, lining up the top hinge.
11. Install the bottom support bracket.
12. Adjust door alignment. When set, tighten screw on hinge.
13. Remove handle. Transfer the screw hole covers to the left and install the handle on the right.
OPERATING YOUR REFRIGERATOR
Control Panel
The refrigerator should be placed where the ambient temperature is between
50 and 95°F (10 to 35°C). If
the ambient temperature is above or below this range, the performance of the unit may be affected. For
example, placing your unit in extremely cold or hot conditions may cause the interior temperature to
fluctuate.
ON/OFF Power
To turn the appliance on or off, press the ON/OFF button.
Setting the Temperature Control
Once the power cord has been connected to a properly grounded outlet, press the
button.
Set the desired cooling temperature by pressing the corresponding button
or
. Each
depression of the buttons will raise or lower the temperature setting by 1 degree. The temperature
selected will flash in the LED display for approximately 5 seconds, then revert back to displaying
the temperature of the cabinet interior.
°C/°F
This unit has the option of displaying temperatures in either Celsius or Fahrenheit. To change the
setting, press the °C/°F button.
Interior Light
Automatically illuminates when the refrigerator door is opened.
Control panel
