Summit CREK4B, Instruction Manual

Page: 5 / 12

5
INSTALLATION INSTRUCTIONS
IMPORTANT:
SAVE THESE INSTRUCTIONS FOR THE LOCAL ELECTRICAL INSPECTOR’S
USE.
IMPORTANT SAFETY INSTRUCTIONS
Precautions Before Installation
•
The installation and electrical connection must be performed by a qualified technician. The
manufacturer can’t be responsible for damage caused by building-in or connecting errors.
•
The appliance must be properly grounded by a qualified technician.
•
The appliance must be well-equipped and installed in a kitchen unit and an adapted and
approved work surface.
•
The appliance can’t be used above a dishwasher or a tumble dryer: steam may damage the
electronic components.
•
Th
e cooking plate can’t be used freestanding or as working surface.
•
The appliance is not intended to be operated by means of an external timer or separate
remote-control system.
•
Unpack the cooktop and its accessories carefully.
•
Remove all labels and self-adhesives from the ceramic glass.
•
Do not change or alter the appliance.
•
Do not use any extension cable to connect it.
INSTALLATION PROCEDURE
The installation must be performed by a qualified technician. The installation must comply with all
local, state and national standards and regulations.
Cooktop Preparation
The gasket supplied with the cooktop prevents the intrusion of liquids into the cabinet below. Its
installation has to be done carefully, as described here:
Stick the gasket (2) 1/16
” from the
external edge of the glass, after
removing the protection tape (3).
1/16”