Summit CP97R-1, Instruction Manual

Page: 7 / 16

6
INSTALLATION INSTRUCTIONS
Before Using Your Appliance
1. Remove the exterior and interior packing.
2. Check to be sure you have all the following parts:
3 door bins
1 bottle bin
3 refrigerator shelves
1 freezer shelf
2 crispers
1 glass crisper cover
1 ice cube tray
Instruction manual
3. Before connecting the appliance to the power source, let it stand upright for
approximately 2 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
4. Clean the interior surfaces with lukewarm water using a soft cloth.
5. In case the interior accessories are not arranged correctly, reposition them as
shown in Location of Parts on page 5.
Installation of Your Appliance

Place your appliance on a floor that is strong enough to support the unit when
it is fully loaded. To level your appliance, adjust the legs at the front of the
appliance.

Leave 5" of space between the back and sides of the appliance and other
surfaces, which allows the proper air circulation to cool the compressor.

Locate the appliance away from direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight may affect the refrigerator's coating and
heat sources may increase electrical consumption. Extremely cold ambient
temperatures may also cause the appliance not to perform properly.

Avoid locating the appliance in moist areas. Too much moisture in the air will
cause frost to form quickly on the evaporator, requiring more frequent
defrosting of the appliance.
Electrical Connection

Warning

Improper use of the grounded plug can result in the risk of electrical
shock. If the power cord is damaged, have it replaced by an authorized
service technician.