background image

 

2.3

 

Door Space Requirements 

The unit's door must be able to open fully as shown.  
W×D ≥ 35.5 X 41.4 inch 
 
 
 
 
 

2.4

 

Leveling the Unit 

To do this, adjust the two leveling feet at the front of the unit.  
If the unit is not level, the door and magnetic seal alignments 
will not be covered properly. 

Make sure that the foot touches the ground before use. 

Look down from the top to check that unit is vertical. Adjust leveling feet as necessary. 

2.5

 

Cleaning before Use 

Wipe  the  inside  of  the  unit with  a  weak  solution of  bicarbonate  soda.  Then  rinse with warm water  using  a  wrung-out 
sponge  or  cloth.  Wash  the  shelves  and  crisper  in  warm  soapy  water  and  dry  completely  before  replacing  in  the  unit. 
Clean the exterior of the unit with a damp cloth. 

If you require more information, refer to the 

Cleaning

 section. 

2.6

 

Before Using Your Unit 

To  ensure  safe  usage,  do  not  damage  the  power  cord  under  any  circumstances.  Do  not  use  when  the  power  cord  is 
damaged or the plug is worn. 

To prevent damage to the product and avoid accidents involving fire, do not put flammable, explosive, volatile or highly 
corrosive items in the refrigerator. 
To avoid fires, do not place flammable items near the refrigerator. 
This  product  is  a  household  refrigerator  and  is  only  suitable  for  the  storage  of foods.  According  to  national  standards, 
household refrigerators must not be used for other purposes, such as storage of blood, drugs or biological products. 
Do  not  place  items  such  as  bottled  or  sealed  containers  of  fluids  such  as  beer  and  other  beverages  in  the  freezer  to 
prevent bursting of containers. 

Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working properly and to allow it 
time to fall to the correct temperature. Your unit should not be overfilled. 

 

 

Before Plugging in

 

         

Be sure you have a socket that is compatible with the plug supplied with the unit.  

 

Before Turning On!

 

         

Do not turn on until two hours after moving the unit.  

 

Summary of Contents for CP972SS

















Reviews: