English
5
Installing Your Refrigerator
Unpacking Your Refrigerator
1.
Remove all packaging material. This includes the foam base and all
adhesive tape holding the refrigerator accessories inside and
outside.
2.
Inspect and remove any remains of packing, tape or printed
materials before powering on the refrigerator.
Proper Air Circulation
t
5PBTTVSFZPVSSFGSJHFSBUPSXPSLTBUUIFNBYJNVNFGGJDJFODZJUXBT
designed for, you should install it in a location where there is proper air
circulation, plumbing and electrical connections.
t
5IFGPMMPXJOHBSFSFDPNNFOEFEDMFBSBODFTBSPVOEUIFSFGSJHFSBUPS
Sides……………3/4” (19mm)
Top....................2” (50mm)
Back..................2” (50mm)
Electrical Requirement
t
.BLFTVSFUIFSFJTBTVJUBCMFQPXFSPVUMFU WPMUTBNQTPVUMFU
with proper grounding to power the refrigerator.
t
"WPJEUIFVTFPGUISFFQMVHBEBQUFSTPSDVUUJOHPGGUIFUIJSEHSPVOEJOH
in order to accommodate a two plug outlet. This is a dangerous practice
since it provides no effective grounding for the refrigerator and may
result in shock hazard.
Use of Extension Cords
t
"WPJEUIFVTFPGBOFYUFOTJPODPSECFDBVTFPGQPUFOUJBMTBGFUZIB[BSET
under certain conditions. If it is necessary to use an extension cord,
use only a 3-wire extension cord that has a 3-blade grounding plug
and a 3-slot outlet that will accept the plug. The marked rating of the
extension cord must be equal to or greater than the electrical rating of
the appliance.
Install Limitations
t
%POPUJOTUBMMZPVSSFGSJHFSBUPSJOBOZMPDBUJPOOPUQSPQFSMZJOTVMBUFEPS
heated e.g. garage etc. Your refrigerator was not designed to operate
in temperature settings below 55˚ Fahrenheit.
t
4FMFDUBTVJUBCMFMPDBUJPOGPSUIFSFGSJHFSBUPSPOBIBSEFWFOTVSGBDF
away from direct sunlight or heat source e.g. radiators, baseboard
heaters, cooking appliances etc. Any floor unevenness should be
corrected with the leveling legs located at the bottom.
t
*GUIFSFGSJHFSBUPSJTOPUMFWFMFEBEKVTUUIFGSPOUMFWFMJOHMFHTCZUVSOJOH
counterclockwise to raise the refrigerator and clockwise to lower it.
