Summit Classic CL181WBV, Instruction Manual

Page: 8 / 16

8
hand side.
5. Screw the alternative left top hinge
8 , included in the fittings, on the left hand side of cabinet. (Fig. 4)
6. Rotate the door 180° and relocate it to the designated position and screw the top hinge pin 1 . Then
tighten top hinge pin 1 and bottom hinge 3 after the door is leveled.
INSTALLING THE STAINLESS STEEL HANDLE
This appliance includes a stainless steel handle that is not required
to operate the unit. To install the handle, follow the instructions
below:
Locate the handle
○
1 over the mounting stub
○
3 of the door and
using the supplied allen key, tighten the securing grub screws
○
2 to
fix the handle.
OPERATING YOUR APPLIANCE
It is recommended that you install the appliance in a place where the ambient temperature is between 72º
and 78ºF (23º-26ºC). If the ambient temperature is above or below the recommended temperatures, the
performance of the unit may be affected. For example, placing your unit in extremely cold or hot
conditions may cause interior temperatures to fluctuate. The range of 36º
– 43ºF (2º– 6ºC) may not be
reached.
CONTROL PANEL
ON/OFF Power
To turn the appliance ON or OFF, touch the symbol and hold for 5 seconds.
NOTE: Pressing this key once can switch off the audible alarm when the alarm is on.
LIGHT
Turns the interior light ON and OFF.
UP
Used to increase (warm) the set temperature by 1°C/1ºF.
DOWN
Used to decrease (cool) the set temperature by 1°C/1ºF.
1
2 3