8
ECO mode:
Press and hold the button
for 3 seconds to enter or exit ECO mode.
In this mode, the interior LED light, the compressor indicator
and the temperature value
on the display panel will be turned off and the symbol
°
will illuminate on the upper left corner
of °C / °F.
Light / Lock
LED lamp brightness mode: with Memory IC (when unit restarts after power failure unit, will
auto recover to last setting), the default brightness is 100%. Each time the button
is
pressed, the brightness of the LED will be cycled through the four positions (100%, 75%, 50%,
OFF)
Press and hold for 3 seconds to lock or unlock the control panel.
ON/OFF Power /
Mute
To turn the appliance on or off, press and hold the ON/OFF button for 3 seconds.
When the high/low temperature alarm is activated, the buzzer will sound continuously. Press
one time to turn off the alarm.
LOCK
If illuminated, indicates the control panel is locked.
RUN
When unit’s compressor is running, this indicator light will illuminate to signify that cooling mode
is currently in operation.
Demo mode
Press and hold buttons
,
and
simultaneously for 10 seconds to enter or
exit demo mode.
In this mode, the display panel can operate settings, but the temperature is a fixed display
12°C (54°F) and all fans plus the compressor will not start.
Sabbath mode
Press and hold buttons
and
at the same time for at least 5 seconds to enter or exit
Sabbath mode. In this mode, LED will display "Sb". This mode turns off the displays, interior
light and prevents them from turning on again. Normal cooling operations will still take place.
The compressor and the fan work normally.
When the cabinet power off, it will not automatically exit Sabbath mode, and it will keep
Sabbath mode when power on again. The Sabbath Mode will automatically turn off after 96
hours.
Defrosting
The unit defrosts automatically in normal operating conditions.
The evaporator behind the rear wall of the unit defrosts automatically. Water will drain through
the drain pipe from the back of the product. Users need to bring the water to the drain or find
an appliance to load the water. (If loading with an appliance, you need to pay attention to
clearing the water regularly)
However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high
heat or high humidity location. If this frost pattern does not clear within 24 hours, your unit will
require manual defrosting.
Mandatory
defrost mode:
Press the
and
at one time for 10 seconds to enter the compulsory defrost mode.
