PG 4
www.summitstands.com
6
USE
PUTTING ON THE HARNESS
1.
Always key off the Black Tether line when picking
up the harness to put it on. This will help keep the
harness tangle free.
2.
The sewn lineman’s loops should be on the outside
of the harness as shown in
figure 3
. Be sure the
shoulder straps do not cross each other and that they
are not twisted.
3.
For
All STS harnesses
- buckle the main belt around
your waist next. Thread the buckle as shown in
figure
4 - 7
. Turn the metal 3 bar slide slightly sideways to
push it into the D-Ring.
WARNING
!
• Always check to make sure leg straps are secure
around legs and buckled before climbing the
tree!!!
• Be sure the harness tether strap is attached to safety
strap!!
• NEVER ALLOW THE TETHER STRAP TO GET UNDER
OR AROUND YOUR NECK
as shown in
figure 1
.
• If wearing harness under hunting clothes, make sure
your hunting clothes are not tight around your neck.
The harness will slip up if you fall as shown
in
figure 2
.
• Always check harness webbing and hardware before
every use for any damaged or worn stitching, webbing
or hardware. If you find a problem,
DO NOT
use
the harness until the problem has been resolved by
Summit Treestands, LLC.
NEVER ALLOW THE TETHER STRAP TO
GET UNDER OR AROUND YOUR NECK!
WARNING
!
1
2
3
4
5
6
7
