Summit Professional DW2432 Use And Care Manual Download Page 29

Page: 29 / 32

USA

Foam

Possible causes

How to fix these problems



The dishes are pre-washed by
hand with a large amount of dish
detergent.



Dishes do not need to be pre-washed. Coarse
dirt may be removed with a dishcloth, or you may
hold the dishes under running water.



Rinse aid has accidentally
leaked into the machine.



If rinse aid has been spilled during refilling,
remove the aid using a paper cloth or sponge.



The cover of the rinse aid
dispenser is not closed securely.



Always take care to ensure that the lid is closed
after refilling the rinse aid dispenser.

Water remains inside the machine
after the rinse cycle

Possible causes

How to fix these problems



Clogged filters.



Clean all filters as described in this manual.



Drain hose kinked or clogged.



Ensure that the drain hose is properly placed and
open.

12. TECHNICAL FEATURES

Load capacity

12 place settings

Permissible water pressure

4.35 - 145 psi (0.3 - 10 bars)

Electrical connection

120 V (volts), 12 A (amps), 60Hz (hertz)

Total power

1200 W (watts)

Heater power

1000 W (watts)

Notice :

Because we continually strive to improve our products, we may change our specifications
and design without prior notice.
This device corresponds to the following directives:
UL 749 Household Dishwasher directive.

Summary of Contents for DW2432

































Search results

Summary of Contents for DW2432

Reviews:

Related manuals for DW2432

Brands by name

Popular brands

Summit Professional DW2432, Use And Care Manual

Search results

Summary of Contents for DW2432

Reviews:

Related manuals for DW2432

Brands by name

Popular brands