manualshive.com logo in svg

Summers M104, Operator'S Manual, Page: 4 / 32

Share
Download
Summers M104 Operator'S Manual Download Page 4

1

SAFETY-ALERT SYMBOL

This symbol is used to denote possible danger

And care should be taken to prevent bodily

Injury.  This symbol means:

ATTENTION! BECOME ALERT!

YOUR SAFETY IS INVOLVED!

Definition of each 

Signal Word

 used in conjunction with the 

Safety-Alert

 symbol.

indicates an imminently hazardous situation which, if not avoided, will result in death or serious 

injury. This signal word is to be limited to the most extreme situations.

indicates a potentially hazardous situation which, if not avoided, could result in death or serious 

injury. 

indicates a potentially hazardous situation which, if not avoided, may  result in minor or moder-
ate injury. It may also be used to alert against unsafe practices.

GENERAL SAFETY PRACTICES

1. READ AND UNDERSTAND 

Operator’s Manual before using machine.  Review at least annually

      

thereafter.

2. VERIFY 

all safety devices and shields are in place before using machine.

3. KEEP 

hands, feet, hair and clothing away from moving parts.

4. STOP 

engine, place all controls in neutral, set parking brake, remove ignition key and wait for all

moving parts to stop before servicing, adjusting, maintaining or unplugging.

5. BE CAREFUL 

when working around high pressure hydraulic system.

6. ALWAYS 

make sure that pressure is relieved from hydraulic circuits before servicing.

7. DO NOT ALLOW RIDERS.

8. USE EXTREME CARE 

when adjustments.

9. KEEP CHILDREN AWAY 

from machinery at all times.

10. NEVER ALLOW 

anyone to walk or work under a raised piece of equipment without installing transport

      locks.

DANGER

WARNING

CAUTION

SECTION 1 -             SAFETY

Summary of Contents for M104

































Reviews:

No comments