Summers M104 Operator'S Manual Download

Page: 3 / 32

INTRODUCTION

This manual provides the following information about your Mounted Harrow or Mounted Rolling Chopper.

ITEMS OF IMPORTANCE

A. Summers Mfg. Co., Inc. strongly recommends that each Operator READ and UNDERSTAND the Oper-

ator’s Manual before using the machine. In addition, this Operator’s Manual should be REVIEWED

at least ANNUALLY thereafter.

B. It is the policy of this company in improve its products whenever possible and practical to do so.

We reserve the right to make changes or improvements in the design or construction of parts at any

time without incurring obligations to install such changes on products previously delivered.

C. Reference to “right” and “left” in this manual is determined from a seated position in the drivers seat.

D. Parts are referenced in each drawing with the Summers Manufacturing Part Number. Use this Part

Number when ordering replacement parts from your Summers dealer.

E. Summers Mfg. can not be responsible for implement frame damage due to draft or weight of Mounted

Attachments.

OWNER REGISTER

Name ____________________________________  Size _________________________________________
Address _________________________________
City _____________________________________
State/Prov. ______________________________

Date Purchased ______________________________

Mail Code ________________________________ Dealer _______________________________________

TABLE OF CONTENTS

Safety Section .......................................................................................................................................1-5

Disk Mounted Harrow Installation Guide .............................................................................................. 6

Mounting Arm Assembly - M94, M104, M105, M106 & M108 ........................................................... 7

4-1/2’, 6’ & 7-1/2’ 3-Bar M94 Section Assembly .................................................................................. 8

4-1/2’, 6’ & 7-1/2’ 4-Bar M94 Section Assembly .................................................................................. 9

6’, 8’ & 10’ 3-Bar M104-M108 Section Assembly ............................................................................... 10

6’, 8’ & 10’ 4-Bar M104-M108 Section Assembly ............................................................................... 11

Disk Brackets ........................................................................................................................................ 12

JD510/512 Disk Ripper......................................................................................................................... 13

Mounting Instructions for Cultivators, Chisel Plows & Disks ...........................................................14-16

Mounting Instructions for JD1610/610 - M74 ...................................................................................... 17

Mounting Instructions for Disk Mounting Brackets ............................................................................. 18

Mounting Instructions for JD235 Disks - M74 ...................................................................................19-21

Packing Lists ......................................................................................................................................... 22

Rolling Chopper Assembly ................................................................................................................... 23

Rolling Basket Arms ............................................................................................................................. 24

Rolling Basket Assembly ...................................................................................................................... 25

Summary of Contents for M104

































Search results

Summary of Contents for M104

Reviews:

Related manuals for M104

Brands by name

Popular brands

Summers M104, Operator'S Manual

Search results

Summary of Contents for M104

Reviews:

Related manuals for M104

Brands by name

Popular brands