Thank you for purchasing the Baby Pixel™ Digital Color Video
Monitor by Summer Infant. Please read the following
instructions and warnings carefully. Keep this instruction
manual for future reference.
Moonlite™ Night Vision Boost
The MoonliteTM Night Vision Boost feature is to help provide better
viewing of your baby, temporarily, when the room is dark. Press and
hold the
MOONLITE
button to illuminate a small LED light on the
camera. A
MOONLITE
icon will appear in the lower right-hand
corner of the screen while button is pressed. When you release the
button, the camera will return to nor mal black & white night vision.
Moonlite will automatically turn off after several seconds.
Depending on how far you have placed the camera from the crib,
you can optionally adjust the
MOONLITE
brightness.
Charge the Handheld
Charge for 7 hours before
first use.
Install the Camera
For best picture focus, place camera 6 to 8 ft. from crib. Plug in
camera. Place camera on a flat surface, such as a tabletop, or
shelf or mount the camera on a wall using the screw and wall
anchor provided.
tabletop
wall mount
MONITOR USER GUIDE
SET-UP
1
SET-UP (continued)
1
or
Secure the Camera Cord
NEVER place the camera or
cords within 3-feet of the
crib.
Secure the cord to your
wall using the 6 security clips
included to keep the cord
away from baby’s reach.
3ft.
Congratulations!
You are now ready
to use your Baby Pixel™ Digital Color
Video Monitor!
3 sec.
Power on the Camera and
Handheld
Press the power/nightlight button on
the
camera
and hold for 3 seconds.
A green light will appear near the
lens.
Press and hold the power button on
the
handheld
unit for 3 seconds. The
handheld will automatically sync
with the camera.
(The handheld unit
and the camera are paired at the factor y
for privacy reasons. If the handheld and
camera are not paired with each other for
any reason, see
Adding a Camera
in the
user guide.)
Screen Icons
Function Buttons
Clock 12/24 HR
Vox Indicator
Zoom
Nightlight
Temperature
Reception
Camera Selection
Batter y Life/ Plugged In
Power/Menu
Moonlite™
Zoom/Video
Camera Steering
Volume
Moonlite™ Brightness
Camera Options
Time / Temp Settings
Screen Brightness
Talk-back
SleepZone™
Vox on / off
Nightlight
SCREEN ICONS & FUNCTION BUTTONS
2
2 9 7 9 0
7hr.
Summer Infant, Inc.
| 1275 Park East Drive | Woonsocket, RI 02895 | 401-671-6551
12/17
STRANGULATION HAZARD:
Children have strangled
in cords. Keep this cord
out of the reach of
children (more than 3 ft.
(0.9m) away).
WARNING
Read all warnings prior to using this product
.
Touch Screen Function
Buttons
10:50 AM
10:50 AM
USING THE HANDHELD
3
Moonlite™ Brightness
Adjustment
Press the
MENU
button.
Touch the
MOONLITE
icon in
the touchscreen. Press
either the plus or minus icon
to adjust the moonlight
brightness. Caution: Do not
stare directly at Moonlite
LED for prolonged periods of
time.
Menu/Power
Press the
MENU/POWER
button to access the
touchscreen menu
features screen. Press
and hold the
MENU/POWER
button
for 3 seconds to turn off
handheld.
Sound Activated Lights
The LED light bar on the top of the
handheld will light up as it picks up
noises, even in power save mode.
When batter y is low, the first LED
flashes red and handheld beeps.
3 sec.
Flip out the kick-stand and place the
monitor on a stable, level surface.
Talkback
Press the
MENU
button.
Touch and hold the
TALKBACK
icon in the
touchscreen. You can
speak with your baby.
Release the button when
done talking to the baby. The
icon will reduce down
to the smaller talkback
icon. The
TALKBACK
icon will
remain on the screen for 10
seconds. You can begin
talking again by pressing and
holding the icon within that
time. To exit talk-back mode,
press the menu button once
or wait 10 seconds to
automatically exit talk-back
mode.
Brightness
Press the
MENU
button.
Touch the
BRIGHTNESS
icon in the touchscreen
menu. Press either the
plus or minus icon to
adjust brightness.
Nightlight
Press the
MENU
button.
Touch the
NIGHTLIGHT
icon in the touchscreen.
Touch the
BLUE
NIGHTLIGHT ICON
and
the camera will emit a
soft blue glow. Touch the
RED NIGHTLIGHT ICON
and the camera will emit
a war m red glow. Nightlights are comforting to little ones,
especially toddlers who become scared in a pitch black room.
Touch the
GRAY NIGHTLIGHT ICON
to turn off.
Vox (Voice Activated
Video) On/Off
The Vox feature, when on,
will turn on your screen
when it is power save
mode and the camera
picks up a sound. To turn
Vox mode off, press the
MENU
button. Press the
VOX
icon.
Turn vox alert
on or off. Vox icon is
displayed on indicator
bar when active.
SleepZone™ Virtual
Boundar y
The SleepZoneTM feature
creates a virtual boundar y
area within your screen view
and is designed to help alert
you with a sound on your
handheld if any object
crosses through this boundar y
box. To use SleepZone, first
press the
MENU
button. Press
the
SLEEPZONE
icon. Press the
MINUS/PLUS
icon on the
lower left-hand side of your
screen to adjust between the
two box size options – small
or large. You can use camera
steering and the zoom button
to position the box around
your baby. Choose alert
volume level by pressing one
of the alert icons on the right
side of the screen. Press
CHECK
to complete
SleepZone set up.
X
icon and boundar y box will
stay visible while in the
SleepZone mode. To exit out
of SleepZone mode, press the
X
icon.
Recommended to plug in
your handheld when using
the SleepZone feature to
extend batter y life.
Volume
Use the up/down arrow
buttons to increase and
decrease the volume.
1 sec.
Video On/Off Power Save
To conser ve batter y power,
press and hold the
VIDEO
button for 1 second to turn off
the handheld’s video. The
screen will go dark. This feature
allows you to preser ve batter y
life when not plugged into A/C
adapter. The audio feature will
remain activated allowing you
to monitor sounds. You can turn
the screen back on by pressing
the video button or tapping
the screen or moving the
handheld. When handheld is
not plugged in, screen will
automatically turn off after 30
seconds.
If Vox feature is on, video will
turn on automatically when
sound is detected.
360Tilt™ Camera Steering
Press and hold the camera steering button. This feature allows you
to control the camera viewing position remotely by tilting the
handheld backward and forward and side to side. The camera will
replicate the position of the handheld until you release the button.
Touchscreen Camera Steering
Tap the camera steering button once. Four camera steering arrows
will appear on the screen. Touch or hold the arrows to reposition
the camera.
