89
CARE AND MAINTENANCE
Re-attaching the Seat Pad, Harness Covers and Infant Body Insert
1. Lay pad in seat, thread harness straps, chest clips and buckle tongue
through the waist strap slots. (If you need to use the lowest slots for the infant body insert,
place insert into seat and thread harness straps through the lowest infant insert slots.)
2. Insert crotch buckle through desired crotch slot position on seat pad.
3. Insert shoulder straps into respective slots for your size child.
4. Turn seat over and attach shoulder straps onto desired loops
onto the harness splitter plate.
5. Wrap seat pad around vehicle belt guide on both sides of seat.
6. Working from the front of the seat, wrap seat pad around
the edge so the tab snaps under the front edge of seat.
7. Pull harness adjuster strap through slot on seat pad.
8. Wrap the tabs on seat sides until they are inserted into place.
9. Wrap tab on rear of seat, tuck law tag under seat pad.
10. Attach harness covers to shoulder straps above chest clip.
11. Re-attach canopy, pull on canopy mount to make sure that it is attached.
12. Insert body support, then insert crotch strap through the
appropriate slots for child’s size.
13. Re-insert infant body insert strap through the top slots on seat pad and through the
seat shell and secure back onto themselves.
