attaching a car seat (continued):
5
Place the two car seat straps, attached to the
stroller rails, into the Vehicle Belt Hooks and across
the car seat and lock the buckle. Slide the padded
buckle guard over the buckle.
4
Place the car seat into
stroller in the rear facing
position so that it is in full
contact with both the
stroller seating surface
and seat back. Rotate the
leg rest up until it firmly
contacts the back of the
car seat.
Colors and styles may vary.
MADE IN CHINA.
D0000000810 9/20
Summer Infant (USA), Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-401-671-6551
© 2020 Summer Infant (USA), Inc.
Summer Infant stands behind all of its products. If you
are not completely satisfied or have any questions,
please contact our Consumer Relations Team at
1-401-671-6551
or
www.summerinfant.com/contact
NOTE: check car seat for
secure fit in stroller.
!
• Clean minor stains on fabric with cold water and mild soap.
• Clean plastic and metal surfaces with a soft damp cloth. Air dry.
• Do not use abrasive cleaners or solvents. Do not use bleach.
• Check seat pad harness and crotch straps weekly to ensure
they are properly secured to frame.
care and maintenance
Avoid serious injury from falling or sliding out. Always
place the car seat straps into the Vehicle Belt Hooks on
the car seat and raise the leg rest up until it is in contact
with the back of the car seat in its locked in position.
WARNING
NOTE: Car seat straps and
protective covers can be
stored in the pockets on
side of the stroller.
!
Vehicle
Belt
Hooks
click!
pull
tight!
pull
tight!
click!
