24/109
Example 2. 45° angle between 2 modules: required gap = 90 mm
Fig. 10. Installation of 2 modules around a corner: gap between 2 poles
Angle between 2
modules
Gap between poles
0°
75 mm
30°
80 mm
45°
90 mm
60°
100 mm
90°
110 mm
Table 1. Gaps between poles for different angles
Note:
If the desired angle is somewhere between two of the values listed in the table, use
the gap size for the higher of the angles (example: 2 modules form an angle of 55°. So for
this, use the gap corresponding to the 60° angle; i.e. 100 mm.)
3.2.3 Cutting modules
The netting can be cut to the right size to adapt it to the precise measurements of the pool.