___
Summation Technology
23
9-7. Show HDD Info.
You can check the information of the built-in HDD includes how many discs are stored and the
free space is available in the HDD.
9-8. Format HDD
This function allows you to format the built-in HDD while the HDD is NOT selected as reading
source. You can change the source from HDD to other drive in 6. Select Source
.
This duplicator is able to detect disc capacity and assign a proper partition for the disc’s data
automatically. You do not have to predict and select CD or DVD partition in the beginning and
you can check how many discs you can upload from 7. Show HDD Info.
This intelligent HDD
management technology is much easier for HDD management.
9-9. Load & Copy
This function is for the system to load the source to HDD and make copy synchronously. The
system will load the source to HDD during the first round of duplication, and the HDD will
replace the reader drive to be the source in second round of duplication. This special function
is very convenient for a big copy task. You also can set:
Synchronous: The system will load the source to HDD and make copy at the same time.
Load First: The system will load source to HDD first and take HDD as source to copy.
OFF: To disable Load & Copy function.
**Note:
The image file will only be saved temporary if it is loaded to HDD by Load & Copy function.
If you would like to save the file permanently please load the file to HDD by manual (refer to 9-2.Disc
to image, page 20)