background image

       ___                            

 

Summation Technology      

 

19 

 

 
8-4. Eject On Start 

You can make the trays or discs eject once the system is booted up.  

 

Eject All Discs:  

Eject all trays with disc inside once the system is booted up. 

 

Do Not Eject:

 Do not eject any tray or disc once the system is booted up. 

 

Eject Target Only:

 Only eject target trays with disc inside once the system is booted up. 

 

Eject Source Only:

 Only eject source disc once the system is booted up. 

 

Eject All Trays:

 Eject all trays once the system is booted up. 

 

8-5. Reader Speed 

This setting allows you to adjust the reading speed of source drive. The default setting of 
reader speed for CD is 40X; DVD is 24X BD is 8X. 
 

8-6. Compare Speed 

The reading speed of drive and disc can affect the quality of comparison. This setting allows 
you to adjust the reading speed of drives to match up the reading speed of discs. The default 
setting of CD’s compare speed is 40X, DVD is 8X, BD is 4X 
 

8-7. Language 

You can set the appropriate user language on the display screen during operation. English, 
Spanish, Portuguese and Japanese are available. 
 

8-8. Clear Setup 

This setting will reset all the functions back to manufacturer’s default setting. 
 

8-9. Advanced Setup 

 

Power On Time:

 You can set a warm-up time from 5 seconds to 99 seconds when the 

duplicator is turned on. The default setting is 10 seconds.    

 

Start-up Menu:

 You can select which function you would like to be displayed in the LCD 

Screen at start-up. 

 

Skip  Read  Error:

  You  can  set  this  function  to enable  the duplicator to skip  disc  

errors  in  order to avoid a low quality copy. If you are confident that your source disc has 
only a small and insignificant number of errors due to physical damages and can be 
overlooked, you can set this function to “NO” to disable it. 

 

**Note:  
   Skip Read Error cannot fix the error in the source disc; it will only skip the errors and keeps copying the rest of 

readable data. 

 

 

Change Bad Master:

 This setting will make the system eject source disc and ask for 

another one while the source disc is unreadable for system. 

 

CD Overburn:

 The majority of discs have a small margin of extra groove at the outer 

edge. This setting allows you to copy data over the normal size limit.  

 

Show HDD Image Name:

 You can select to show HDD image name or capacity on Copy, 

Test, Copy + Compare and Compare function 

Summary of Contents for SummitBLUPro


























Reviews: