External Trigger: Soldering of Connector with Cable
55
SMX-12A2x Series Gigabit Ethernet Camera User Guide
Please note that each pin is marked with a number according to the pin layout (see
“Connector Pinout” on page 45
). The pins numbering is located at the internal side of the
inner part of the connector.
Figure 7-16
Connector pinout outlook
Note also that direction of pin numbering is done clockwise starting from the key at the
upper edge of the inner part of the connector.
Figure 7-17
The pin numbering direction
When the soldering is done, insert the inner part of the connector in the main part.
1
2
3
4
5
6
1
2
3
4
5
6
Key: the start point of pin num-
bering
Shows the direction of pin
numbering
Summary of Contents for SMX-12A2C
Page 1: ...User Guide Megapixel Gigabit Ethernet CMOS SMX 12A2X Series Gigabit Ethernet Cameras...
Page 34: ...Tuning Guidelines Statistic Settings 34 SMX 12A2x Series Gigabit Ethernet Camera User Guide...
Page 44: ...Capturing Saving Options 44 SMX 12A2x Series Gigabit Ethernet Camera User Guide...
