Tuning Guidelines: Sensor Settings
26
SMX-12A2x Series Gigabit Ethernet Camera User Guide
Figure 4-5
Changing viewport
3
You can select one of the predefined viewport options. If the viewport size is smaller
than maximum viewport size, drag the rectangle across the full viewport resolution
area for the viewport window. You will notice how the image in the
View Mode
win-
dow changes with the movement.
4
Alternatively, you can change values in the following fields:
●
Offset X, Y
fields with coordinates of the top left corner of the rectangle
●
Size X, Y
fields with coordinates of the bottom right corner of the rectangle
you can also change it by dragging the video image in the
Video mode
window.
5
Press
Apply
to save changes.
Output Mode
The camera can transmit raw video data in one of four output modes. Use the drop-
down box of the
Output Mode
section to switch between camera modes.
●
8 bit
- select this option for viewing video on display
●
8 bit compress
- this mode provides the highest frame rate
Note:
Before processing 8 bit compressed camera output, make sure that it is decompressed.
●
10 bit
,
12 bit
- you can enable these modes for demonstration purposes, e.g. you can
view camera statistics via the
Statistics
tab in the
Settings
box.
Summary of Contents for SMX-12A2C
Page 1: ...User Guide Megapixel Gigabit Ethernet CMOS SMX 12A2X Series Gigabit Ethernet Cameras...
Page 34: ...Tuning Guidelines Statistic Settings 34 SMX 12A2x Series Gigabit Ethernet Camera User Guide...
Page 44: ...Capturing Saving Options 44 SMX 12A2x Series Gigabit Ethernet Camera User Guide...
