manualshive.com logo in svg

Sumitomo T-400S, Manual

Share
Download
Sumitomo T-400S Manual Download Page 9

8 

 

The European Union has enacted a Directive 2002/96/EC on Waste 
Electrical and Electronic Equipment (WEEE Directive). This directive is 
applicable in the  European Union member states. The crossed out 
wheelie bin symbol found on our products indicates that it should not be 
disposed of together with household waste.   
To prevent possible harm to human health and the environment, waste 
electrical  equipment must be disposed of in an approved  and 
environmentally safe recycling process. 
For further information on how to dispose of the product correctly, please 
contact the product supplier, or the local authority responsible for waste 
disposal in your area.

 

 

WEEE Directive (Waste Electrical and Electronic Equipment; 2002/96/EC) 

   

RoHS Directive (2011/65/EU)

 

The T-400S optical fusion splicer is RoHS-compliant. 

IMPORTANT: REGION LIMITATION 
 

WARNING: 

This product is sold for the use in a limited sales area and the sale, resale, transfer, 
lease or otherwise of this product to the other regions is prohibited, except written 
consent of Sumitomo Electric Industries, LTD.   
YOU NEED TO AGREE ABOUT A SOFTWARE  LICENCE AND REGION LIMITATION 
BEFORE USE. 
 
Reference of Sales Area and Sumitomo Sales & Service Representatives: 

Sales Area 

Sumitomo Sales and Service Representatives 

North America 

SEL 

Sumitomo Electric Lightwave Corp. 

Europe, Middle east, 
Africa (EMEA),UK 

SEEL    Sumitomo Electric Europe Ltd. 

China 

SEA   

Sumitomo Electric Asia, Ltd. 

SEAC    Sumiden Asia(Shenzhen) Co., Ltd. 

Thai, Vietnam 

SET 

Sumitomo Electric(Thailand) Limited 

Indonesia, Singapore 

SEAP 

Sumitomo Electric Asia Pacific Pte. Ltd. 

India, South Asia 

SETI 

SEI Trading India Pvt. Ltd. 

Philippines 

SEPI 

SEI (Philippines) Incorporated 

Japan 

SEI 

Sumitomo Electric Industries ,Ltd. 

   

Other sales area and authorized sales and service agencies may be provided 

according to the country, area and trading conditions. Refer to the information 
which appears on the splicer screen. 

 

Summary of Contents for T-400S

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands