4-6
1)
In the protection sleeve type
category screen (page 4-2),
move the cursor “
” to the one
where you would like to modify
heater program settings and
press
key.
<Modify heater program parameter>
2)
Select the setup mode icon
. (Press
key.)
3)
Move the cursor “
” to the
heater program where you would
like to modify the settings and
select
(press
key).
4)
Move the cursor
“
” to the
item you would like to modify
and press
key.
5)
Adjust the value using
▼▲
keys. Move the
cursor “
” to left
and right using
and
keys.
After adjustment, move the cur-
sor to
icon and
press
or SET
key.
The left-hand keys are some-
times used to move the cursor
“
” up and down, and to left
and right.
key is pressed
to enter the selected item.
Enter