![Sumitomo L-10 ELF Operating Instructions Manual Download Page 5](http://html1.mh-extra.com/html/sumitomo/l-10-elf/l-10-elf_operating-instructions-manual_1390689005.webp)
Programming is the process of selecting options from the special features of the
L-10 TV. Programming includes selecting entertainment channels, as well as
educational and information channels and assigning these to different service
levels. TV's are programmed before they are installed in a hospital; however,
when TV's are replaced or the channel numbers change, reprogramming is
needed. Make these programming changes with the infrared hand unit .
How do I program the L-10 ELF?
1. Turn the TV on.
To do this, point the infrared (IR) hand unit at the lower right corner of the
television and press the POWER button. A small light emitting diode beside
the POWER button on the TV "lights up" when the TV is on. You can also turn
the TV on by pressing the POWER button on the TV control panel.
2. Press SETUP. The main SETUP MENU
appears on the TV screen.
3. Press the CHANNEL (CH
) button on the
infrared hand unit until your menu selection
is highlighted.
4. Press the VOLUME (VOL
) button to
accept the selection or to change the option.
When you have completed a selection, press
SETUP on the infrared hand held unit to return
to the previous menu selection. Continue to
Press SETUP until the TV program appears.
10
Owner's Manual
How to use the infrared hand unit :
Hold the IR unit flat in the palm of your hand, with the buttons up.
Stand about the length of your arm, back from the television.
Point the infrared hand unit directly at the lower, right corner of the front control
panel on the television. This is important. A misdirected infrared beam can
change programming on a nearby television.
Make the selection on the infrared hand unit by pressing and releasing the
button(s) quickly.
The FREE, PAID, LOCKED buttons work even when the TV is turned off.
How to install and change batteries in the infrared hand unit :
Press down on the ridged area of the battery cover and slide it off.
Install 2 "AA" batteries in the battery holder. Make sure to match the + end of
each battery to the + end in the battery holder.
Replace the battery cover and turn the remote over.
9
Owner's Manual
A
bout programming the L-10 ELF
SETUP MENU
Rental: Free
Picture
Sound
Channel Setup
Features
Blocking
Language: English
TO Select
+ - To Change
Main SETUP MENU
A
bout the infrared (IR) hand unit
Infrared Hand Unit (back view)
Installing New Batteries