7
This electric snow shovel cuts a path 12" /30.5 cm wide and up to 6"/15.24 cm
deep in one pass.
When clearing deeper drifts, hold the electric snow shovel by the upper and
lower handles and use a swinging or sweeping motion. Remove up to 6" /15.24
cm of snow with each pass and repeat as many times as needed.
Keep the cord clear of obstructions, sharp objects and the rotating paddles. Do
not pull sharply on the cord or abuse it in any manner. Frequently inspect the
cord for signs of damage. If damage is found, replace the cord immediately.
This electric snow shovel is equipped with a 1 W LED light to facilitate clearing
at night and under conditions of poor visibility (Fig. 8). When you start the
machine, the LED light will automatically power on and illuminate the path in
front of you. When you stop the machine, the LED light will automati-cally
power off.
Disconnect the extension cord after using the electric snow shovel. Hang the
extension cord with the shovel so it will not be misplaced or damaged.
REPLACING THE PADDLE
Use a wrench to remove the bolt and the washer on the right side of the
housing (Fig. 9).
Using a cross-head screwdriver, disassemble the
left side cover by removing
the seven screws (Fig. 10).
Remove the tensioner. Unscrew the three screws securing the big pulley plat e,
then remove the plate and pulley assembly (Fig. 11).
