background image

 

                                                                                                       

 

 
 

 

 
Use  this  appliance  only  with  a  polarized  UL-,  CSA-  or  ETL-  listed  extension 
cord recommended for outdoor, all-weather use. 
The appliance plug will fit into a polarized extension cord only one way. If the 
appliance plug does not fit fully into the extension cord, reverse the plug. If the 
plug  still  does  not  fit,  obtain  a  correct  polarized  extension  cord.  A  polarized 
extension  cord  will  require  the  use  of  a  polarized  wall  outlet.  The  extension 
cord plug will fit into the polarized wall outlet only one way. If the plug does not 
fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact 
a  qualified  electrician  to  install  the  proper  wall  outlet.  Do  not  modify  the 
appliance plug, extension cord receptacle or extension cord plug in any way. 

 
IMPORTANT:

  Check  the  extension  cord  frequently  during  use  for  holes  or 

cracks  in  the  insulation.  Do  not  use  a  damaged  cord.  Do  not  run  the  cord 
through standing water or wet grass. 
Use only an extension cord recommended for outdoor use. 
 

SECURING THE EXTENSION CORD 

 
Make a loop with the extension cord (Fig. 5). 
Insert the loop through the opening in the back of the upper handle and secure 
the loop onto the extension cord hook (Fig. 6).   
Connect the extension cord to the snow shovel. 

 

 

Summary of Contents for 5554-511












Reviews: