page 4
Step 6
Use ¼” x 1-¼” screws (6) to connect the
Metal Tube (O), Support Frames (M) and
(N) with Large Table Top (A). NOTE:
Do not
screw to the end.
Then connect Support
Frames (M) and (N) with Metal Tubes (P)
and (O). Lastly, screw all the screws tightly
to the end. Then install one Locking Caster
(14) and two Casters (15) on to Support
Frame (M) and (N). Turn the Table Top
upwards. Insert the round tube on
Support Frame (M) into the round
tube on Table Top (B).
Step 4
Use ¼” x 3⁄8” screws (4) to connect Metal Square (19)
to corner of Small Table Top (B).
Step 5
Screw Cam-bolt (9) and Handle (16) into Front Panel
(D). Screw Cam-lock (10) into Side Panels (E) and (F),
then insert into Front Panel (D). Insert Bottom Panel
(H) into the grooves of Panels (E), (F), and (D). Use 3⁄16”
x 2”
screws (3) to connect the Back Panel (G) with Side
Panels (E) and (F). Tightly screw Cam-Locks (10) and
put in the drawer.