page 3
Step 1
Press the plastic locking bar in the drawer Sliders (11) and pull out the track. Screw the track
on to the Support Frames, (I) and (J), and Drawer Side Panels (E) and (F).
Step 2
Use ¼” x 1-½”
screws (7) to connect the Support Frames (J) and (K) to (L) and Metal Tube (Q).
Step 3
Use ¼” x 1-¼” screws (6) to connect Support Frames
(I), (J), and (K) to Small Table Top (B). Use ¼” x 1-3⁄16”
screws (5) to connect Support Frame (I) and (J) to
Bottom Board (C). Use 1⁄8” x 9⁄16”
screws (1) to install
the Locking Casters (12) and Casters (13) onto Bottom
Board (C). Screw one Locking Caster (14) and one Caster
(15) to Support Frame (K). Then turn the Table Top upwards.