Sullair ShopTek ST1100, User Manual

Page: 20 / 72

S
HOP
T
EK
™
USER MANUAL SECTION 2
18
02250180-090 R00
2.7 CONTROLLER/KEYPAD
Refer to Figure 2-9 . The Controller keypad has two
main pads for compressor control. To start the
compressor operation, press the green Start pad
.
To stop compressor operation, press the red Stop
pad . The Run mode indicator lights up
whenever the control is in an operating mode.
2.8 LCD DISPLAY
The display's normal view shows the compressor
package's discharge pressure, internal temperature,
operating mode, and load status. The modes are
MANUAL, STOP, AUTOMATIC, or FAULT.
Refer to Figure 2-10 . If a machine fault occurs, the
red fault indicator will light up, and the display will
indicate that a fault has occurred.
Figure 2-10
®
X
S
1
2
3
4
5
6 7 8 9 10 11
Figure 2-9: Controller Panel
1. Run Mode Indicator Light (Green) 6. Start Button
2. Power On Indicator Light (Red) 7. Return/Reset Button
3. Fault Warning Indicator Light (Red) 8. Cursor/Confirm Button
4. Display Panel 9. Up Button
5. Stop Button 10. Down Button
11. Set/Load/Unload Button
STOP:
RTD
Fault