Sullair 300HH User Manual Download Page 15 | Manualshive

Page: 15 / 80

Sullair 300HH User Manual Download Page 15

SECTION 1

13

a.

verified that no person will be exposed to
danger.

b.

verified that the “Authorized” person who
applied the device is not in the facility.

c.

noted that all reasonable efforts to con-
tact the “Authorized” person have been
made to inform him or her that the lock-
out or tagout device has been removed.

d.

ensured that the “Authorized” person is
notified of lock removal before returning
to work.

2. Tagout System—Tags are warning devices

affixed at points of power disconnect and are

not to be removed by anyone other that the

person placing tag on power lockout. Tags

shall never be by-passed, ignored, or

otherwise defeated

1.13 CALIFORNIA

PROPOSITION 65

WARNING

CALIFORNIA PROPOSITION 65 WARNING

Diesel engine exhaust and some of its con-
stituents are known to the State of Califor-
nia to cause cancer, birth defects and other
reproductive harm.

Battery posts, terminals and related acces-
sories contain lead and other compounds
known to the State of California to cause
cancer and birth defects and other repro-
ductive harm. Wash hands after handling.

«
...
13
14
15
16
17
...
»

Summary of Contents for 300HH

















































































Reviews:

No comments