Sullair 185 T3 Kubota, User Manual

Page: 45 / 58

185 T3 Kubota User Manual 5: Maintenance
02250223-054 R01
Subject to EAR, ECCN EAR99 and related export control restrictions. 41
5.9.2 Compressor fluid filter element
replacement
Refer to
Figure 5-1
.
1. Remove the old element with a strap
wrench.
2. Clean the gasket seating surface.
3. Apply a light coating of fluid to the new gas-
ket.
4. Hand tighten the new element until the new
gasket is seated.
5. Continue tightening the element by hand an
additional ½ to ¾ turn.
6. Restart the compressor and check for leaks.
5.9.3 Air filter maintenance
Refer to
Figure 5-2
. Air filter maintenance should be per-
formed as often as conditions require. If the filters are
equipped with optional maintenance indicators, change the
filters every time the indicators show a change is necessary.
5.9.3.1 Air filter replacement
1. Loosen and remove the air filter and cover.
2. Remove the primary and optional secondary
elements.
3. Clean the body, inside and out, with a damp
cloth.
4. Reinstall (if clean) or replace the secondary
element if installed.
5. Replace the new primary filter element.
6. Reposition the cover and lock it into the position.
7. Reset the filter restriction indicator (if
equipped).
Figure 5-1: Fluid filter
1. Fluid filter
1
2. Compressor unit
3. Thermal valve manifold
1
Fluid filter replacement P/N: 02250209-729
Figure 5-2: Air filter
1. Filter body
2. Filter cover
3. Primary element
1
4. Safety element (optional)
2
1
Replacement primary element P/N: 02250102-158
2
Replacement safety element P/N: 02250102-160