（6/13）
２．
Panel name, function description
The names and functional descriptions of each LED, switch, and connector are shown in Figure
2.1 and Figure 2.2.
Mark
Name
Content
1
Connect LED
(Green)
Lights when the EFP body is connect.
2
Device LED(Orange)
Lights up when device command is executed.
3
Status LED
(Red/Green)
When the result of device command execution ends
normally, it will light up in "green".
When device command execution result ends in error, it
lights up in "red".
4
Power Connector
It provides DC17.5V to 24V from outside.
5
T_VDD Voltage
Setting Switch
Voltage setting switch of T_VDD to be supplied to user
target. It is possible to set the voltage of T_VDD to
3.3V, 4.5V, 5V.
6
T_VPP Voltage
Setting Switch
Voltage setting switch of T_VPP to be supplied to user
target. It is possible to set the voltage of T_VPP to
4.5V, 5V, 7.9V, 12V.
7
EFP body Connection
Connector
Connects EFP body, using EF1TGCB-16W16W.
8
User Target Connection
Connector
Connects user target, using target connection cable.
9
Start Switch
It is an operation start switch.
It is connected to the external start input terminal of
each EFP body.
Figure 2.1 RC-G4B Panel Figure
