Inputs
HI:
"
Use this input for guitars with passive or high impedance pickups.
LO:
"
Use this input for guitars with active or low impedance pickups.
Boost (located on the back)
Provides a Post-EQ boost in gain to the output section for more saturation
while leaving the pre-amp clean and punchy.
NOTE:
Boost function requires a latching on/off foot switch to activate.
Tubes
The single channel tube complement consists of four 6V6 power tubes, three
12AX7 and one 12AT7 preamp tubes.
Speaker Outputs:
The single channel has two loudspeaker outputs and utilizes a custom built
output transformer and has two loudspeaker outputs (one 8
Ω
and one 4
Ω
) to
interface with a variety of speaker cabinet options.
