SUHNER MACHINING AG 12-2, Installation Instructions Manual

Page: 8 / 16

P
ortugúes
Español
Italiano
English
a
ttaching
/D
etatching the right angle Drive
Press the locking button, and insert the right angle drive
into the connecting hole. Make sure that the locking but-
ton is engaged. Detatching in reverse order.
a
ttaching
/D
etatching the flexible shaft
Press the locking button, and insert the flexible shaft into
the connecting hole. Make sure that the locking button is
engaged. Detatching in reverse order.
s
ervicing the flexible shaft
New or freshly greased shafts require a running-in period
of about one hour. Daily use requires monthly lubrication
as follows:
Draw the shaft core out of the casing. Remove old shaft
grease. Apply only a small quantity of shaft grease to the
shaft core. Replace worn shaft cores. Keep the hose cou-
pling clean and slightly greased. Replace worn couplings.
F
rançais
Deutsch
English
8