SUGATSUNE LAMP FD50-H, Installation Manual, Page: 2 / 10

2
No. ① ② ③ ④ ⑤ ⑥ ⑦ ⑧
Name
Two-way Soft
Closer
Front trigger Pocket trigger
Upper roller
(recessed)
Floor guide
Door guide
track
Open area track
Door
pocket track
Order code 250-020-764 250-029-707 250-029-706 250-020-765 250-029-718 250-019-971 Available with various length and finishes
Part No. FD50-WRH-DSC FD50-TRGPF FD50-TRGPB-HB FD50-WRH FD50-BGR18 FD30-HBRT1500SIL FD50-TRP
1pc 1pc 1pc 1pc 1pc 1pc 1pc 1pc
Accessories
Pan head tapping
screws
3.8 x 40
Countersunk head
tapping screws
4 × 40
Countersunk head
tapping screws
4 × 40
Pan head tapping
screws
3.8 x 40
Countersunk head
tapping screws
4 x 20
Countersunk head
tapping screws
4 × 20
Countersunk head tapping screws 4 x 40
(Q'ty depends on the hole location)
Options
№ ⑨ ⑩
Name
Face cap for
upper roller
Cleaner for
upper track
Part No. FD50-WRH-CP FD50-TRC
Parts
×
FD50 Below parts which are packed with two-way
soft closer ① are not needed for thisapplication.
Trigger mount jig ② Trigger
:2pcs
Screws 4×30 D6
:4pcs
The below shows the sliding door when the leading edge is aligned with the connecting position of the upper tracks.
If you like to shift the connecting position towards Door pocket, see page 9.
・ Philips head driver #2 ・ Machine or tool for cutting
aluminum ally ・ Drill bit for metal:
ϕ
4 ・ Drill bit for metal
(for
ϕ
7.8 countersunk hole)
The profile of ⑦ and ⑧ are the same,
but the cut length and hole location are
different. See installation procedure
1
for the detail.)
COMPONENT PARTS
INSTALLATION DRAWING (EXAMPLE)
TOOLS REQUIRED FOR INSTALLATION
30
30
30
30
30
30
200
30
Margin
DN
:LGWKRIGRRUSRFNHW5S: 5:í5R:í'1
Track length (opened area): Lo
= Available opening length:RoW
Track OHQJWKGRRUSRFNHW/S 5:í5R:
10
30
Door width: DW=RoW+DN+10 (In case of No Margin (DN = 0) : RoW+20)
Opening width: RW
44
7 1 2 8 4 3
2× I 5
Process holes for Trigger
(leading edge)
I 5.2 I 9.6 CSK
Process holes for track
mounting
I
5.2
I
9.6 CSK Process holes for track mounting
Connecting position
of Upper rails
Trailing edge at
closed position
Leading edge at full opened position
Front face of door pocket
215
30
30
418
Full opened status
Connecting position
of Upper rails
Trigger of Leading
edge side
Trigger of Trailing edge side
Overlap: 10
(In case of No Margin (DN = 0) : 20)
Min. Opening width of door pocket = Door thickness : Dt + 14
Closed status
In case of No Margin (DN = 0), front
part of the door pocket must be
detachable for door hanging work.
16
16
28
30
15
10
17
Min. 7
Door thickness Dt = Min. 30
28
49(51) 49(51)
48 48
* ( ) show the dimensions when
using Cover caps.
16
R8
15
17
2
× C5 (Min.)
Min. 7
6 5
Door
9
+4 í
Door backward
and forward
adjust range
Door vertical
adjust range
3
4
2 2