4.1
4.2
4.3
4.1
Lighting
4.2
Manual mode
(ON/OFF).
4.3
Automatic mode:
Shuts lights ON/OFF according to a
timer. The timers can be configured with a frequency: Daily;
Every 2 days; Every 3 days; Every 4 days; Every 5 days;
Weekly; Every 2 weeks; Every 3 weeks; Every 4 weeks.
5.5
5.2
5.1
5.3
5.4
5.1
Auxiliary relays
5.2
It is possible to control up to 4 extra auxiliary
relays (water features, fountains, automatic irrigation
systems, built-in cleaning systems, air pumps for
spas, garden lighting, etc.). This menu displays the
relays which are still available on your device and
allow configuration.
5.3
Manual mode
(ON/OFF).
5.4
Automatic mode:
ON/Off according to a timer.
The timers can be configured with a frequency: Daily;
Every 2 days; Every 3 days; Every 4 days; Every 5
days; Weekly; Every 2 weeks; Every 3 weeks; Every
4 weeks.
5.5
Timer mode:
Working time is programmed in
minutes. Each time the key on the front panel in
relation to the relay is pressed, it will start up for the
time programmed. This function is recommended for
the timing of air pumps for spas.
4.4 Lighting
4.5 Auxiliary relays
6.9
Sound:
Programming of the system to emit sound for the functions:
Keyboard
(keys);
Notices
(pop-up message);
Alarms
(working alarm);
Filtration
(start of the filtration).
6.11
Password:
Allows to protect the access to the user´s menu by activating a password.
To enter your password press a combination of 5 keys and the system will memorize. If
you forget the password, there is a “master password”. Ask you installer/provider
6.12
Time info:
The system memorizes the operation times of the different modules and
they are displayed on the screen.
6.13
System info:
Information about the available software version of the TFT display and
the power module. It also shows the ID node which is necessary for the configuration of
the WIFI connection of the system.
6.3
Setting
of preferred language.
6.5
Setting
of day and current time.
6.7
Setting
of the intensity of the
display lighting (0-100%) and
programming its ON and OFF time.
4.6 Settings
6.12
6.14
6.13
6.1
6.3
6.4
6.2
6.5
6.8
6.9
6.6
6.11
6.7
6.10
2 x
Clima OFF:
The heating only works within the set filtration periods.
Clima ON:
Keeps the filtration working when the filtration period is finished if the
water temperature is below the setting temperature. When the setting temperature
is reached the filtration and the heating will stop and will not switch on till the next
programmed filtration period.
3.6
Intelligent*:
In this mode the user has 2 working parameters to guaranty the
desired water temperature with a minimum of filtration hours: You select the desired
water temperature and the minimum filtration time (minimum of 2 hours and
maximum of 24 hours). The device divides the selected “minimum filtration time”
in 12 fragments which start up every 2 hours. If one of these fragments finishes,
without the temperature reaching the desired level, the filtration/heating continues
until the desired temperature is accomplished. In order to keep the filtration-
electricity-cost to a minimum, this additional filtration time is subtracted from the
following fragments of the “minimum filtration time”. The first 10 minutes of each
fragment will not be subtracted. Example (see diagram): Minimum temperature =
28°C and minimum filtration time = 12 hours.
3.7
Filter cleaning mode (and pool cleaning by suction):
Use the
up/down
keys to activate or deactivate the filtration pump. The device will inform about the elapsed time
from the moment of activation or deactivation. Follow the instructions of the filter manufacturer to execute an adequate filter cleaning.
* Note:
Modes only visible if the option to use temperature and/or heating probe is activated in the “Installer Menu”.
4.3
Filtration
(continuation)
DIAGRAM INTELLIGENT MODE
0h
10 min
1h
OFF
ON
3h
5h
7h
9h
11h
13h
15h
17h
19h
21h
23h
2h
4h
6h
8h
10h
12h
14h
16h
18h
20h
22h
24h
27ºC
27ºC
28ºC
28ºC
28ºC
