www.ssilocators.com
05
SERIES
Unpack your new PL-VF Locator. Make sure there is no shipping damage and all the parts are included.
Locate the battery compartment on the back of the of the
r
eceiver
and on the bottom of the
T
ransmiTTer
.
Open the compartments using a Phillips screwdriver. If your unit is a rechargeable system, remove the
terminal isolation paper to allow the battery spring to contact the battery terminal.
If the unit is configured for alkaline batteries, Install the six alkaline Duracell® “C” batteries as marked in
the receiver and twelve Duracell® “D” batteries as marked in the
T
ransmiTTer
.
For rechargeable units, please charge for at least 5 hours before use. Remove the terminal isolation paper
inside the battery compartments to allow the battery spring to contact the battery terminal.
Note: For longer battery life and reliable operation under adverse conditions, use only Duracell® alkaline
batteries.
Note: The battery type used must be selected in the programming menu of the transmitter and the receiver.
For instructions on how to select please see page 4.
By registering your unit online at http://www.ssilocators.com/warranty-registration within
one month (30 Days) of purchase, SubSurface Instruments, Inc. will extend the warranty
period from one year to 4 years.
This instrument is under warranty for one year from the date of delivery against defects in
material and workmanship (EXCEPT BATTERIES). We will repair or replace products that
prove to be defective during warranty period.
This warranty is void if, after having received the instrument in good condition, it is subjected to abuse,
unauthorized alterations or casual repair.
No other warranty is expressed or implied. The warranty described in this paragraph shall be in lieu of
any other warranty, including but not limited to, any implied warranty of merchantability or fitness for a
particular purpose. We are not liable for consequential damages.
p
repare
for
u
se
r
egister
e
xtended
W
arranty
