To Replace Batteries in Your AML+ Unit:
1. Unscrew the battery access cap and remove the
battery sleeve.
2. Individually, lift each battery out of the sleeve,
turn it 180 degrees and remove used battery.
3. Install new battery in the battery sleeve and re-
position by turning 180 degrees into the sleeve.
Use caution when handling the wiring harness.
4. Reinsert the battery sleeve into the handle,
silver lead end first.
5. Replace battery access cap.
Note:
One battery sleeve is included with each unit. Each battery sleeve uses
three (3) 9-volt industrial grade alkaline batteries. For best results and longer
battery life use only industrial grade 9-volt batteries. Additional or replacement
battery sleeves are available by emailing [email protected]
BATTERY REPLACEMENT
Easy Battery
Access Cap
Battery Pack
(Houses (3) 9-Volt
Batteries)
13
