9
BLUETOOTH AUDIO SOURCE
For Bluetooth pairing, power off the device, unplug the
audio cable, and then hold down the power button for 4
seconds to make your SUBPAC® M2X visible to devices.
The Bluetooth LED will turn solid blue.
Search for “SUBPAC M2X” in your transmitting device’s
Bluetooth settings and pair with it as per the manufacturer’s
recommendations. When paired the blue LED will flash until
audio is played, at which time it will turn solid again. Note that
plugging in the LINE IN port cable will automatically turn off
Bluetooth.
1
2
WIRED AUDIO SOURCE
HEADPHONES
Connect the output of your audio source to LINE In port
on the control box using the supplied 3.5mm audio cable.
Then slowly increase the intensity to your desired level.
Plug your headphones into the headphone port on the
control box. Bluetooth headphones are not supported.
replace “blue LED” w/
Bluetooth LED
??
add
OTHER
before “devices” ??