7
FIT AND ADJUSTABILITY
The SUBPAC® M2X is designed to fit tightly on your body.
The more physical contact the unit has with your back, the
better the experience will be. The SUBPAC® M2X has been
ergonomically designed to fit the contours of your back
naturally. The cover is water-resistant but not waterproof. Do
not immerse in water! The SUBPAC® M2X can be cleaned
with a damp cloth and a mild detergent.
SHOULDER STRAP
Strap the SUBPAC® M2X on as shown in the illustration.
Adjust the shoulder strap so that it fits tightly against your
body. The shoulder strap can be pulled down to tighten.
BACK SIDE STRAPS
The back side straps can be adjusted for a better fit, they
are pre-set at the factory to fit most body types.
CHEST STRAP
The chest strap can be adjusted up and down by the
slider buckle on each end. Once you have found the
proper location that feels good, it can then be pulled to
the right to tighten.
FASTENING THE CHEST STRAP
While wearing the pack, align the right magnetic buckle on
top of the left buckle. The magnet will self-locate and
secure the buckle in place. Remove by sliding the right
buckle up.
OPTIONAL WAIST STRAP
The optional waist strap can be hooked into the provided
webbing loops located in the lower rear wing strap of your
SUBPAC® M2X.
all ok?
updated graphics