45 Logan Ave S, Renton, WA 98057 – phone: 425-228-6831, toll free: 888-64METER
Page
3 or 4
www.SubmeterSolutions.com - [email protected]
7. Securely mount the Ethernet modem. It may be most convenient to simply sticky back tape it to the side of
the NoWire enclosure with the two provided sticky back tape squares or you may use the zip tie and zip tie
holder which can be screwed or stuck to a wall.
8. Apply power to NoWire, the WebConnect Ethernet modem, and plug the LAN patch cable into an active RJ45
Ethernet jack. The active Ethernet must have access to the internet and support DHCP. Most Routers installed
by your Internet Service Provider have spare RJ45 jacks in the back which can be used by the WebConnect
Ethernet modem.
