To assemble, loosely screw the arm rest saddle to the two bars using the four M3 x 25mm
screws. If a taller height for the saddle rest is preferred, the optional spacer can be added
underneath the arm rest saddle to increase height by 0.75 inches.
Before tightening the arm rest saddle screws the rest of the way, rest the joystick base on top of
the slots, and align the arm rest bars with the sides of the base. Tightening the screws before
aligning the bars could make aligning the long slots with mounting holes more difficult later.
The long slots will allow the arm rest some adjustability forward and back. This adjustment is
best made once the stick is mounted in its final resting place.
2.2. Clamp/Mounting Holes and Assembling the Mount
