1.
Do not splash water on the freezer, as it will cause oxidation and malfunction. Electronic component such as
on/off button should be wiped dry.
2.
Cleansers such as soap powder, abrasive cleaning powder, alkali cleansers, chemical cloth, thinner, alcohol,
acid petroleum product and hot water should not be used to clean the freezer as they may damage the
painted cover and plastics.
3.
Smear can damage the interior plastic component, so wipe it as soon as possible.
4.
Please check the points below after maintenance:
a. Is there any damage or loss of the electronic wire ?
b. Can the plug be put in the socket reliably and smoothly?
c. Is the plug heating unconventionally?
7
Heavy frost will influence the refrigeration of the appliance and increase the energy consumption. Thus,
defrosting is needed when the frost is as thick as 5mm. The process for manual defrost are listed as follows:
•
Take all the food out of the compartment;
•
Remove the shelf;
•
Unplug the power cord;
•
Open the doors and wait for thawing;
•
Wipe the defrost water with a dry cloth.
In case of a power failure, the freezer can store food normally for several hours.
❑
During power failure
After power failure, do not put additional food in the appliance and reduce the frequency of door opening. Make
several ices in a container if know the power failure beforehand, and put it in the top of the fridge.
❑
During vacation
Please fetch out the easy-rot food and the food in fridge before shot vacation. After confirmation, close the door
firmly. If have a long vacation, please fetch out all the food and cut off the power. After defrosting, clean up the
liner of the appliance and wipe it dry, and leave the door open.
❑
Not in use
If the freezer will not be in use for a long period of time, please unplug the outlet and clean up the appliance. The
door should be kept open in order to prevent unpleasant smell caused by food leavings.
Warning:
Do not use any other equipment or method to assist the defrost process. It may cause
damage to the cooling system.
Attention:
In a general working conditions, do not restart the power immediately, please leave at at least 5
minutes before powering back on.
WARNING:
Please get rid of the gasket of the door before the disposal. The disposed apparatus should be
handled by professional staff, as it may be harmful to the environment.