Subaru Legacy 2023, Getting Started Manual

Page: 22 / 164

Power Driver’s Seat (if equipped)
1 Seat Position: Moving the
switch forward or backward
will adjust the seat in that
direction. Pulling up or
pushing down on the back of
the switch will adjust the seat
height up or down. Pulling up
or pushing down on the front
of the switch will adjust the
angle of the seat cushion.
2 Recline Seatback: Moving
the top of the switch forward
or backward will adjust the
angle of the seatback.
3 Lumbar Support: Press the
front side of the switch to
increase lower back support.
Press the rear side of the
switch to decrease support.
If equipped, press the upper
or lower side of the switch to
adjust the lumbar support
height.
4 Thigh Extension (if equipped):
Pull up on the lever below
the seat cushion to adjust
the length.
If equipped, your Subaru can
be programmed to automatically
recall your preferred Power
Driver’s Seat position. For step by
step instructions on setting the
Power Memory Seat, please refer
to page 120 in this Getting
Started Guide.
Power Seat Controls
Thigh Extension
Memory Seat Buttons
GETTING COMFORTABLE
20