Subaru Legacy 2023, Getting Started Manual

Page: 122 / 164

The clock automatically adjusts as follows:
• 11.6-inch display with navigation system: Automatically adjusts the clock when a GPS
signal is available.
• 11.6-inch display without navigation system: Automatically adjusts the clock when a
STARLINK
®
Safety and Security signal is available. Without STARLINK
®
Safety and
Security, the clock automatically adjusts when a phone is paired and connected via
Bluetooth
®
. “Phonebook Download” must be enabled in the Phone Settings.
• Dual 7.0-inch display: The clock automatically adjusts when a phone is paired and connected
via Bluetooth
®
. “Phonebook Download” must be enabled in the Phone Settings.
For step-by-step procedure to pair a phone to the SUBARU STARLINK
®
Touchscreen, see
page 122 for Android devices or page 128 for Apple devices in this Getting Started Guide.
MEMORY DRIVER’S SEAT (if equipped)
You can set the seat and outside mirror position and retrieve them
using the buttons on the driver’s door or the access key fob. You
can learn more about setting and retrieving your seat and mirror
positions from the how-to video linked in the QR code and the
following steps.
To set a seat position with a
button:
1. Make sure the select lever is in
the “P” position, with the
parking brake applied and the
ignition in the “ON” position.
2. Adjust your seat and outside
mirrors to the desired position.
3. Register the position by either
of the following procedures:
• Press the “SET” button, and then
press and hold either button “1”
or “2”. A chirp sounds when the
position is registered.
• While holding the “SET” button, press and hold either button “1” or “2”. A chirp sounds
when the position is registered.
Memory Seat Buttons
HOW TO APPENDIX
120