Subaru Legacy 2023, Getting Started Manual

Page: 89 / 164

SOUND
To change the sound settings, press the “Home” button and select “Settings”, then
“Sound”. Choose the setting you want to change.
SETTING FUNCTION
Audio In the audio settings, you may have the following setting
capabilities:
•
Sound Customization — This function allows you to set the
Equalizer, Balance/Fader and Vocal Image Control.
• Equalizer — How good an audio program sounds is
largely determined by the mix of the treble, mid and bass
levels. In fact, different kinds of music and vocal
programs usually sound better with different mixes of
treble, mid and bass.
• Balance/Fader — A good balance of the left and right
stereo channels and of the front and rear sound levels is
also important.
Keep in mind that when listening to a stereo recording or
broadcast, changing the right/left balance will increase
the volume of 1 group of sounds while decreasing the
volume of another.
• Vocal Image Control — Extracts only vocal sound from
whole sound and adjusts volume balance off vocals only.
•
Sound Restorer — This function plays compressed audio
with quality near original sound by adding the complement
signal of high tone.
• Virtual Bass — This function corrects the bass sound by
adding harmonic sound.
• Dynamic Beat Enhancer — This function expands the
dynamic range lost in data compression and creates a sharp
beat sound.
• Speed Volume Control — The system adjusts to the
optimum volume and tone quality according to vehicle speed
to compensate for increased vehicle noise.
• AUX Volume Gain — Sets the AUX volume gain.
Navigation Guidance
Volume Sets the navigation prompt volume.
Notification Volume Sets the interrupt guidance volume.
Beep Sound Setting Turns the tone sound on or off.
Beep Sound Volume Sets the tone sound volume.
Phone Ringtone Volume Sets the ringtone volume.
Incoming Call Volume Sets the volume of the received call.
Call Volume Sets the call volume.
SMS/MMS Ringtone
Volume Sets the SMS/MMS ringtone volume.
SETTINGS AND UPDATES
87