㸱
Fig. 6
Fig. 5
Fig. 7
(3)Garnish
(3)Garnish
(3)Garnish
Groove
(1)Box
(1)Back panel
Support
Rib
Side panel
9.
(3)Garnish
(6)Sealer
(6)Sealer
(1)Back panel
Hang on the
back of the
side panel.
(1)Back panel
(5)B1 Screw x 2(M5x10)
a
a
Cross section a-a
8. Apply the (6) sealer to the upper part
of the underside of the (3) garnish.
(Fig. 5)
Apply the sealer so that it does not show
from the upper part of the garnish.
9. Install the (3) garnish to the (1) back
panel. (Fig. 6)
10.H a n g t h e ( 3 ) g a r n i s h r i b o n t h e
b a c k o f t h e s i d e p a n e l, a n d a l i g n
the holes in the (1) back panel and
the (2) brac ket. Then, sec ure with
the (5) B1 sc rews M 5x10 (2 pc s.).
(Fig. 6)
11. Align the groove on the (1) box with the
support of the (1) back panel, and press
on the (1) box to the (1) back panel.
(Fig. 7)
Aligning the groove with the support
back panel. Do not use excessive force.
This can result in damage to the product.
5. With the (1) box cover closed, slide the
lock button down until it clicks to unlock.
(Fig. 4)
6. Open the (1) box. (Fig. 4)
7. Raise the box to remove it. (Fig. 4)
Fig. 4
5.Unlock
Lock button
Lock button
(1)Box
(1)Back panel
6.
7.