PART NUMBER:
J1010FL300
ISSUE
01
12/6/2016
SUBARU OF AMERICA
PAGE
6/7
14
Reinstall the 10x highlighted clips below. From the ground looking up, the black clips will go through the black
plastic engine covers first and then through the front bumper. Tuck in remaining covers.
PART NUMBER: J1010FL300
12
Carefully, reposition front bumper onto vehicle. Tip: Ask a helper to lift the opposite side for precise
positioning. See Step 14's diagram to check stacking sequence between bumper and black plastic covers.
13
Engage the front tabs. With the bumper is securely supported, reconnect the fog lights on both sides. Then
carefully and precisely engage the side tabs on both sides. Check tabs for proper engagement.
Bottom View
(Viewed from ground looking up)
The highlighted clips will go through the black plastic
engine covers first and then into the front bumper.
The exception being the undisturbed 3x clips from Step 6.
